OEM 5 Axis CNC impellers pump impeller
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB,CIF |
Min. Order: | 1 |
Transportation: | Ocean,Land,Air |
Port: | Dalian,Manzhouli,Suifenhe |
Payment Type: | L/C,T/T |
Incoterm: | FOB,CIF |
Min. Order: | 1 |
Transportation: | Ocean,Land,Air |
Port: | Dalian,Manzhouli,Suifenhe |
Package Type | : | by requirements of the customer |
OEM 5 Axis CNC impellers pump impeller
Generally, there are two kinds of structures: one is a front half-open type, which is composed of a rear cover plate and a blade. The impeller of this structure is low in efficiency, and a sealing ring with an adjustable gap is needed for improving efficiency; the other is a rear half-open type. It consists of a front cover plate and a blade. Since the same sealing ring as the Closed Impeller can be applied, the efficiency is basically the same as that of the closed impeller, and the blade has a sealing function (back blade or auxiliary impeller) in addition to the liquid. The semi-Open Impeller is suitable for conveying liquids containing suspended solids such as solid particles, fibers, and the like. The semi-open impeller is less difficult to manufacture, lower in cost, and more adaptable. It is gradually used in centrifugal pumps for refining and chemical industry, and is used to transport clean water and liquids with similar water.
According to the structure, it can be divided into binary impeller and ternary impeller, and ternary impeller is divided into open ternary impeller or closed ternary impeller.
According to the purpose, it can be divided into compressor impeller, water pump impeller (nuclear pump), power generation impeller.
According to the material, it can be divided into: KMN, FV520B, Q345E, TC4, 06Cr13Ni5Mo, etc.
Manufacturing capacity:
Our company owns one Swiss-made Starrag ZT800 dual-station five-axis machining center and two American-made Hurco Vtxu five-axis machining centers. It has a complete production chain for reverse mapping, design and manufacturing of impellers of the following sizes.
NO. Name Processing range (diameter) 1 300mm-3500mm 2 Open Impeller 300mm-1250mm 3 Closed Impeller 200mm-900mm
Commonly used impeller materials are as follows:
FV520B
C | Si | Mn | Cr | Ni | Cu | Mo | Nb | P | S |
0.04-0.07 | 0.3-0.7 | ≤1.0 | 13-14.5 | 5.0-6.0 | 1.3-1.8 | 1.3-1.8 | 0.25-0.45 | ≤0.03 | ≤P 0.03 |
Q345E
C | Si | Mn
| Cr | Ni | Cu | Mo | Nb
| S | P | V | Ti |
≤0.18 | ≤0.50
| ≤1.70 | 0.30 | 0.50 | 0.30
| 0.10
| 0.07 | ≤0.025 | ≤0.025
| 0.15 | 0.20 |
TC4
Ti | Fe | C | N | H | O | Al | V |
margin | ≤0.30 | ≤0.10 | ≤0.05 | ≤0.015 | ≤0.20 | 5.5~6.8 | 3.5~4.5 |
06Cr13Ni5Mo
C | Si | Mn
| Cr | Ni | Mo | S | P |
≤0.05 | ≤0.60 | 0.50-1.0 | 11.5-14.0 | 2.5-5.5 | 0.5-1.1 | ≤0.025 | ≤0.025
|
For a long time, our company has produced a large number of CNC machining impellers to serve various domestic industries. And some products are exported abroad.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.